r2a4 tyre tread depth and legal limit

Tyre tread depth and legal limit

Tips and advice for Auto

A tyre is designed to meet performance requirements. But beyond a certain level of wear, it needs to be changed. What is the role of the tread? Up to what level of wear does the tyre remain effective? And what is the legal minimum tread depth for changing your tyres? Find out the answers to all your questions.

The performance of a tyre

The primary functions of a tyre are to carry a load and to allow the vehicle to accelerate, brake and turn. But beyond its functions, a tyre is chosen for the performance you expect from it, which is relative to your use.

It is the way a tyre is designed that will make it perform better under certain conditions than others. And to achieve specific performance, it is the tread that plays a decisive role.

The sculpture's grooves on the tread surface are essential to perform. Depending on their design, they will be more effective in certain conditions, on snow, on dry or wet roads.

The tyre's tread depth also plays a role in performance. For example, it is important for water drainage when driving on wet roads. This ensures that the tyre maintains contact with the ground and postpones the aquaplaning effect to higher speeds.

tyre tread water

What is the tread depth of a new tyre ?

This will depend on the tyres and the choice of manufacturer, but here is what is important to know: the tread pattern should be thick enough to ensure a long life for the tyre.

However, if the tread is too deep, it will also consume too much energy during driving, and therefore fuel, because of the heat released by the rubber when it deforms.
This is why the tyre's tread depth is designed by the manufacturer to find the best balance between the life of the tyre and the fuel consumption related to tyres.

What is the legal tyre limit of the tread depth ?

The minimum tread depth is 1.5 mm. This means that it is imperative to change your tyres once this limit has been reached to avoid compromising your safety and breaking the law.
But it also means that it is premature to change your tyres before this threshold. This paragraph below how to check if the wear level is reached.

At MICHELIN, we design tyres with performances made to last. That is, they are able to provide an excellent performance right up to the last kilometre, when the wear threshold is reached. There are two main reasons why MICHELIN optimizes the longevity of its tyres : less frequent tyre changes save you money and are more environmentally friendly. This is why MICHELIN designs tyres that perform well until the minimum tread depth is reached.

Tyre tread check

Professionals use a specially designed tool to check the legal tyre limit of the tread, known as a tyre gauge. If you are not equipped with one, you can easily find out the wear level of your tyre thanks to the wear indicators, which are identified on MICHELIN tyres by a small Michelin man. 

When the tread wear level reaches the wear indicators (which define the legal tyre limit), it is time to change your tyre.


See other related articles

You are using an unsupported web browser
You are using a website browser that is not supported by this website. This means that some functionnality may not work as intented. This may result in strange behaviors when browsing round. Use or updgrade/install one of the following browsers to take full advantage of this website